Quickor Strut Tower Bar Installation
Model : GEO, Storm Category : Suspension - Strut bars
... 1) Set parking brake firmly (chock rear wheels if necessary) and open hood. 2) Remove the 3 mounting bolts from the top of the strut, also remove and save the rubber plug from the 4th hole in the strut tower at this time. 3) Jack up one side of the vehicle until the mounting bolts on that side can be pushed free of the strut tower. A little force may be required to loosen the top of the ... (more)
Posted : 24 May 2005  
 
Quick Repairs
Model : BMW, 5 - Series (E34) 1989-96 Category : Misc
... delay valve inline between the clutch slave cylinder and the hydraulic fuel line that feeds it. Its purpose is to delay clutch function to guard against drivetrain damage that may occur during "hole shot" starts. It also makes the clutch feel weird and un-BMW-like. Remove the valve, take it outside, and throw it as far as you can. Thread the hydraulic line fitting directly into the slave ... (more)
Posted : 15 February 2005 Author : Jonathan Talbot
 
Quick and easy rear bumper DIY... for Passat
Model : Volkswagen, Passat Category : Exterior - Rear Bumper
... side) with a pencil. --Do this carefully and in small increments if necessary to prevent a return trip to the skate shop! Cut along the line you've made, leaving a small bit (a few mm) for error. Use big, sharp scissors. It's much easier to cut this way. Lay it back on the bumper to assess the contour. Once you are happy with the look (don't stick on yet!), get the other, uncut piece of tape. ... (more)
Posted : 17 November 2004 Author : Mark Merrill
 
Browse by title :
# | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z
Browse by make :
A | B | C | D | E | F | G | H | I | J | M | N | P | S | T | V